Instructions for Use:

1. Supply Voltage:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 5.5V to avoid damage to the component.

2. Operating Current:

   • The typical operating current (Icc) is 10mA, but it can go up to 20mA. Design your circuit to handle this current draw.

3. Output Voltage:

   • When the output is high (VoH), it should be between 4.2V and 5V.
   • When the output is low (VoL), it should be between 0V and 0.4V.

4. Input Voltage:

   • For a high input (VIH), the voltage should be between 3.5V and 5V.
   • For a low input (VIL), the voltage should be between 0V and 1.5V.

5. Propagation Delay Time:

   • The propagation delay time (tpd) is typically 5ns but can vary up to 10ns. This is important for timing considerations in your design.

6. Temperature Range:

   • The storage temperature (Tstg) range is from -40°C to 85°C.
   • The operating temperature (Topr) range is from 0°C to 70°C. Ensure the component is not exposed to temperatures outside these ranges during operation.

7. Handling:

   • Handle the component with care to avoid static discharge, which can damage the internal circuits.
   • Follow proper soldering techniques to ensure reliable connections without overheating the component.

8. Mounting:

   • Mount the component on a PCB with appropriate spacing to allow for heat dissipation and easy access for testing and troubleshooting.

9. Testing:

   • Before finalizing the design, test the component under various conditions to ensure it meets the required specifications and performance criteria.

10. Storage:

    • Store the component in a dry, cool place away from direct sunlight and sources of heat or moisture.