Instructions for Use

1. Handling and Storage:

   • Store the capacitors in a dry, cool place to avoid moisture damage.
   • Handle the capacitors with care to avoid mechanical stress or damage to the leads.

2. Soldering:

   • Preheat the capacitors to 80°C ± 10°C before soldering to minimize thermal shock.
   • Use a soldering iron with a temperature setting of 350°C ± 10°C.
   • Solder each lead for no more than 3 seconds to prevent damage to the capacitor.

3. Polarity:

   • Ensure correct polarity when installing the capacitor. The positive lead is typically marked on the component.
   • Reversing the polarity can lead to failure or explosion of the capacitor.

4. Operating Conditions:

   • Do not exceed the maximum voltage rating of 35 VDC.
   • Operate the capacitor within the specified temperature range of -40°C to +85°C.
   • Ensure that the ripple current does not exceed 1200 mA at 100 kHz to avoid overheating and premature failure.

5. Mounting:

   • Mount the capacitor vertically to ensure proper heat dissipation.
   • Secure the leads firmly to the PCB to prevent mechanical stress during operation.

6. Inspection:

   • Inspect the capacitor for any visible damage before installation.
   • Check for any signs of leakage or bulging after installation and during operation.

7. Disposal:

   • Dispose of the capacitor in accordance with local environmental regulations.
   • Do not incinerate the capacitor as it may release harmful substances.