Instructions for Use:

1. Input Connection:

   • Connect the input voltage (VIN) to the positive terminal and ground (GND) to the negative terminal.
   • Ensure the input voltage is within the specified range (4.5V to 28V).

2. Output Configuration:

   • Adjust the output voltage (VOUT) using the external resistor divider network if required.
   • The output voltage can be set between 1.0V and 5.5V.

3. Load Connection:

   • Connect the load to the output terminals (VOUT and GND).
   • The maximum continuous output current is 2.0A.

4. Thermal Management:

   • Ensure adequate heat dissipation to prevent the device from exceeding the maximum operating temperature (125°C).
   • Use a heatsink if necessary, especially under high load conditions.

5. Protection Features:

   • The device includes short-circuit protection (SCP) and over-temperature protection (OTP).
   • In case of a short circuit, the device will auto-restart with a cycle time of 1ms.
   • The device will shut down if the temperature exceeds 160°C.

6. Start-Up and Shutdown:

   • The start-up time is approximately 2ms when the input voltage rises from 0 to 5V.
   • Ensure a smooth and controlled power-up sequence to avoid transient issues.

7. Storage and Handling:

   • Store the device in a dry environment within the storage temperature range (-55°C to 150°C).
   • Handle the device with care to avoid damage to the pins and components.