Instructions for Use

1. Input Voltage (VIN):

   • Ensure the input voltage is within the range of 2.7V to 5.5V.
   • The device can operate continuously within this range.

2. Output Voltage (VOUT):

   • The output voltage can be set between 3.3V and 5.0V.
   • Use external resistors to set the desired output voltage if the device is adjustable.

3. Quiescent Current (IQ):

   • The quiescent current is typically 10μA at an input voltage of 5V.
   • This low current consumption helps in power-efficient designs.

4. Dropout Voltage (VDROPOUT):

   • The dropout voltage is typically 400mV at an output current of 100mA.
   • Ensure that the input voltage is at least 400mV higher than the output voltage to maintain regulation.

5. Load Regulation (ΔVOUT):

   • The load regulation is typically 10mV when the load current changes from 1mA to 100mA.
   • This indicates the stability of the output voltage under varying load conditions.

6. Line Regulation (ΔVOUT):

   • The line regulation is typically 10mV when the input voltage varies from 2.7V to 5.5V.
   • This ensures stable output voltage despite variations in input voltage.

7. Output Current (IOUT):

   • The device can provide up to 150mA of continuous output current.
   • Ensure that the load does not exceed this limit to avoid damage.

8. Thermal Shutdown (TSD):

   • The device will shut down if the temperature exceeds 160°C to prevent thermal damage.
   • Ensure proper heat dissipation and cooling to avoid reaching this threshold.

9. Operating Temperature (TOPR):

   • The operating temperature range is from -40°C to 85°C.
   • Ensure that the device operates within this range to maintain reliability.

10. Storage Temperature (TSTG):

    • The storage temperature range is from -65°C to 150°C.
    • Store the device in a suitable environment to avoid damage during storage.

Additional Notes:

• Always refer to the datasheet for detailed specifications and application notes.
• Proper PCB layout and component selection are crucial for optimal performance.