Share:
Specifications
SKU: 8975836
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Collector-Emitter Voltage | VCE(off) | - | 1200 | - | V | IC = 0, Tj = 25°C |
| Gate-Emitter Voltage | VGE(off) | - | ±20 | - | V | IC = 0, Tj = 25°C |
| Continuous Collector Current | IC | - | 50 | - | A | Tc = 25°C, Tj ≤ 150°C |
| Pulse Collector Current | IC(rms) | - | 75 | - | A | tp = 10 ms, IC(rms) = 50 A, Tj ≤ 150°C |
| Total Dissipation Power | PT | - | 1500 | - | W | Tc = 25°C, Tj ≤ 150°C |
| Junction Temperature | Tj | - | - | 150 | °C | - |
| Storage Temperature Range | Tstg | -40 | - | 150 | °C | - |
| Thermal Resistance, Junction to Case | Rth(j-c) | - | 0.3 | - | K/W | - |
| Turn-On Time | ton | - | 0.2 | - | μs | VGE = 15 V, IC = 50 A, Tj = 25°C |
| Turn-Off Time | toff | - | 0.4 | - | μs | VGE = -15 V, IC = 50 A, Tj = 25°C |
| Reverse Recovery Time | trr | - | 0.15 | - | μs | IC = 50 A, di/dt = 100 A/μs, Tj = 25°C |
Instructions for Use:
Handling and Storage:
- Store the GT50JR22 IGBT in a dry, cool place within the specified storage temperature range.
- Handle the device with care to avoid mechanical damage.
Mounting:
- Ensure proper thermal management by using a heatsink or cooling system to maintain the junction temperature below 150°C.
- Apply a suitable thermal interface material (TIM) between the IGBT and the heatsink to enhance heat dissipation.
Electrical Connections:
- Connect the gate and emitter terminals carefully to avoid short circuits.
- Use appropriate gate drive circuits to ensure reliable operation. The gate-emitter voltage should not exceed ±20V.
Operating Conditions:
- Do not exceed the maximum ratings for collector-emitter voltage, gate-emitter voltage, and continuous collector current.
- Monitor the junction temperature to prevent overheating, especially during high-power operations.
Testing:
- Before installing the IGBT in a circuit, test it using a low-voltage source to verify its functionality.
- Use a multimeter to check for continuity and insulation resistance.
Safety Precautions:
- Always wear appropriate personal protective equipment (PPE) when handling high-voltage components.
- Follow all safety guidelines and regulations to prevent electrical hazards.
Troubleshooting:
- If the IGBT fails to operate correctly, check for any short circuits or open circuits in the connections.
- Verify that the gate drive signals are within the specified range and that the heatsink is functioning properly.
By following these instructions, you can ensure the reliable and safe operation of the GT50JR22 IGBT.
(For reference only)Inquiry - GT50JR22 50JR22 IGBT
