Instructions for Use:

1. Supply Voltage (VCC):

   • Ensure the supply voltage is within the range of 4.5V to 20.0V to avoid damage to the IC.

2. Output Current per Phase (IOUT):

   • The continuous output current per phase should not exceed 2.0A. For optimal performance, keep it below 1.0A.

3. Peak Output Current (IPEAK):

   • The peak output current can go up to 3.5A, but it should be kept below 3.0A to ensure reliability.

4. Operating Temperature (TOPR):

   • The operating temperature range is from -40°C to 85°C. Ensure proper heat dissipation if operating near the upper limit.

5. Thermal Shutdown (TSD):

   • The IC will shut down if the internal temperature exceeds 150°C to prevent thermal damage.

6. Under-Voltage Lockout (UVLO):

   • The IC will enter a shutdown state if the supply voltage drops below 3.8V to protect against low-voltage conditions.

7. Standby Current (ISBY):

   • In standby mode, the current consumption is typically around 10μA when the input voltage is 5V and there is no load.

8. Input Capacitance (CIN):

   • Use an input capacitor of approximately 100pF to stabilize the input voltage and filter out noise.

9. Output Capacitance (COUT):

   • An output capacitor of around 220μF is recommended to stabilize the output voltage and improve transient response.

Additional Notes:

• Always use appropriate heat sinks or cooling methods if the IC is expected to operate at high currents or temperatures.
• Ensure all connections are secure and free from shorts or open circuits to prevent damage.
• Refer to the datasheet for detailed pin configurations and application circuits.