Instructions for Use:

1. Handling and Storage:

   • Store in a dry, cool place to prevent moisture damage.
   • Handle with care to avoid mechanical stress on the component.

2. Soldering:

   • Use a soldering iron with a temperature setting of 350°C to 400°C.
   • Soldering time should not exceed 3 seconds per terminal.
   • Avoid excessive heat as it can damage the resistor.

3. Mounting:

   • Place the resistor on the PCB with the correct orientation.
   • Ensure the PCB is clean and free from contaminants before soldering.
   • Use a flux appropriate for tin/lead soldering.

4. Testing:

   • After soldering, check the resistance value using a multimeter to ensure it matches the specified value.
   • Verify that the resistor is securely attached to the PCB and there are no short circuits.

5. Operating Conditions:

   • Ensure the operating voltage does not exceed the maximum rated voltage.
   • Operate within the specified temperature range to avoid performance degradation or failure.

6. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Since the component is not RoHS compliant, handle it according to hazardous material guidelines.