Instructions for Use:

1. Power Supply:

   • Connect the VCC pin to a power supply within the range of 2.5 V to 5.5 V.
   • Ensure a stable power supply to avoid erratic behavior.

2. Ground Connection:

   • Connect the GND pin to the ground of your circuit to provide a reference point.

3. Output Connection:

   • The output is an open collector, so connect a pull-up resistor between the output pin and VCC.
   • The typical value for the pull-up resistor is 1 kΩ to 10 kΩ.

4. Magnetic Field Application:

   • Apply a magnetic field perpendicular to the surface of the sensor to trigger the switch.
   • The switch will activate when the magnetic field strength exceeds the BOP threshold (35 Gauss typical).
   • The switch will deactivate when the magnetic field strength drops below the BRP threshold (20 Gauss typical).

5. Temperature Considerations:

   • Ensure that the operating temperature remains within the specified range (-40°C to +85°C) to maintain reliable operation.

6. Handling Precautions:

   • Handle the component with care to avoid static damage.
   • Store in a dry environment to prevent moisture damage.

7. Testing:

   • Test the device in a controlled environment to ensure it meets the required specifications.
   • Use a multimeter to verify the output state (high or low) when applying and removing the magnetic field.