Share:
Specifications
SKU: 9224933
| Parameter | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | VCC | 2.0 | - | 6.0 | V |
| Input Low Voltage | VIL | - | 0.8 | - | V |
| Input High Voltage | VIH | - | 2.0 | - | V |
| Output Low Voltage | VOL | - | 0.1 | 0.4 | V |
| Output High Voltage | VOH | 2.4 | - | - | V |
| Input Current (Low) | IIL | -1 | - | -0.4 | mA |
| Input Current (High) | IIH | -0.1 | - | 20 | μA |
| Output Current (Low) | IOL | - | - | -25 | mA |
| Output Current (High) | IOH | - | - | 25 | mA |
| Propagation Delay Time | tpd | - | 12 | - | ns |
| Power Dissipation | PD | - | - | 100 | mW |
| Operating Temperature Range | TA | -40 | - | 85 | °C |
| Storage Temperature Range | TSTG | -65 | - | 150 | °C |
Instructions for Use:
Power Supply:
- Connect VCC to the positive supply voltage (2.0V to 6.0V).
- Connect GND to the ground.
Input Signals:
- Ensure input signals are within the specified range for VIL and VIH.
- Do not exceed the maximum input current ratings.
Output Signals:
- Ensure load currents do not exceed the maximum output current ratings.
- Check the output voltage levels to ensure they meet the required logic levels.
Propagation Delay:
- Account for the propagation delay time when designing timing-sensitive circuits.
Temperature Considerations:
- Operate the device within the specified temperature range to avoid damage.
- Store the device in the recommended storage temperature range.
Handling:
- Handle the device with care to avoid static discharge, which can damage the internal circuitry.
- Follow proper soldering techniques to prevent thermal shock.
Decoupling Capacitors:
- Place decoupling capacitors close to the power pins to minimize noise and ensure stable operation.
Pin Configuration:
- Refer to the pinout diagram provided in the datasheet to correctly connect all pins.
Testing:
- Perform initial testing under controlled conditions to verify correct operation before integrating into a larger system.
Inquiry - 74HCT190N
