Specifications
SKU: 9226253
Parameter | Symbol | Value | Unit |
---|---|---|---|
Drain-Source Voltage | VDSS | 80 | V |
Continuous Drain Current | ID | 200 | A |
Peak Pulse Drain Current | IDM | 600 | A |
Gate-Source Voltage | VGS | ±20 | V |
Gate Charge | Qg | 150 | nC |
Input Capacitance | Ciss | 3000 | pF |
Output Capacitance | Coss | 1200 | pF |
Reverse Transfer Capacitance | Crss | 1000 | pF |
Total Power Dissipation | Ptot | 250 | W |
Junction Temperature | Tj | -55 to +175 | °C |
Storage Temperature | Tstg | -55 to +175 | °C |
Instructions for Use:
Handling Precautions:
- ESD Protection: Handle the device with ESD (Electrostatic Discharge) protection to avoid damage.
- Mounting: Ensure proper mounting to a heat sink to manage thermal dissipation effectively.
Circuit Design:
- Voltage Ratings: Ensure that the drain-source voltage (VDSS) does not exceed 80V under any operating conditions.
- Current Ratings: The continuous drain current (ID) should not exceed 200A. For pulse applications, the peak pulse drain current (IDM) can go up to 600A but should be within the specified time frame.
- Gate Drive: Apply gate-source voltage (VGS) within the range of ±20V to ensure reliable operation.
Thermal Management:
- Heat Sink: Use an appropriate heat sink to keep the junction temperature (Tj) within the -55°C to +175°C range.
- Thermal Interface Material: Apply thermal interface material (TIM) between the device and the heat sink to enhance thermal conductivity.
Storage and Operating Conditions:
- Storage Temperature: Store the device in an environment where the temperature ranges from -55°C to +175°C.
- Operating Temperature: Operate the device within the specified junction temperature range to ensure reliability and longevity.
Testing and Verification:
- Initial Testing: Perform initial testing at lower currents and voltages to verify proper operation before scaling up to full specifications.
- Regular Maintenance: Regularly inspect the device and its connections for signs of wear or damage.
Compliance and Standards:
- RoHS Compliance: Ensure that the device complies with RoHS (Restriction of Hazardous Substances) directives if applicable.
- Safety Standards: Adhere to relevant safety standards and regulations for the application in which the device is used.
By following these parameters and instructions, you can ensure optimal performance and longevity of the HY4008W MOSFET.
(For reference only)Inquiry - HY4008W MOS HY4008 80V 200A TO-247