Instructions for Use:

1. Supply Voltage:

   • Ensure the supply voltage (VCC) is within the range of 1.8V to 5.5V.
   • Avoid exceeding the maximum supply voltage to prevent damage to the device.

2. Operating and Storage Temperature:

   • The device can operate within a temperature range of -40°C to 125°C.
   • Store the device within a temperature range of -65°C to 150°C.

3. Output Current:

   • The device can source or sink up to 20mA per output when VCC is 5V.
   • Ensure that the load does not exceed this current limit to avoid overheating or damage.

4. Input Leakage Current:

   • The input leakage current should be kept below 5μA to ensure proper operation.
   • Use appropriate pull-up or pull-down resistors if necessary to manage input levels.

5. Propagation Delay Time:

   • The propagation delay time is typically 4ns at 25°C and VCC=5V.
   • This parameter is crucial for timing-sensitive applications.

6. Power Dissipation:

   • The maximum power dissipation is 650mW at 25°C.
   • Ensure adequate heat dissipation if operating near the maximum power limit.

7. Quiescent Current:

   • The quiescent current is typically 1μA at 25°C and VCC=5V.
   • This low current consumption makes the device suitable for battery-powered applications.

Additional Notes:

• Always refer to the datasheet for the most accurate and detailed information.
• Proper PCB layout and decoupling capacitors are recommended to ensure stable operation.
• For specific application notes and further details, consult the Renesas documentation.