Instructions:

1. Handling and Storage:

   • Store the module in a dry, clean environment within the specified temperature range.
   • Handle the module with care to avoid mechanical damage.

2. Mounting:

   • Use the recommended mounting torque (20-25 Nm) to ensure proper contact and heat dissipation.
   • Ensure that the mounting surface is flat and clean to prevent any air gaps.

3. Electrical Connections:

   • Connect the terminals according to the datasheet diagram to avoid incorrect polarity and potential damage.
   • Use appropriate wire gauges to handle the rated current.

4. Thermal Management:

   • Ensure adequate cooling to keep the junction temperature within the operating range.
   • Use thermal paste or a thermal pad between the module and the heatsink for better thermal conductivity.

5. Testing:

   • Perform initial testing at low power levels to verify correct installation and connections.
   • Gradually increase the power levels while monitoring temperatures and performance.

6. Safety:

   • Follow all safety guidelines and use appropriate protective equipment when handling high-voltage and high-current components.
   • Ensure that the module is properly insulated and isolated from other conductive parts.