Share:
Specifications
SKU: 9260380
| Parameter | Symbol | Min | Typical | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Forward Breakover Voltage | VBO | - | 80 | 120 | V | IF = 10 mA, TA = 25°C |
| Holding Current | IH | 5 | - | 10 | mA | VM = 10 V, TA = 25°C |
| Peak Repetitive Reverse Voltage | VRRM | - | - | 700 | V | TA = 25°C |
| Maximum Repetitive Peak On-State Current | ITSM | - | - | 100 | mA | t = 1 ms, IF = 0 mA, TA = 25°C |
| Maximum RMS Output Current | IT(RMS) | - | - | 50 | mA | VM = 250 Vrms, TA = 25°C |
| Maximum Continuous Output Current | IT(AV) | - | - | 30 | mA | VM = 250 Vrms, TA = 25°C |
| Input Trigger Current | IFT | 5 | 10 | 20 | mA | VF = 1.2 V, TA = 25°C |
| Input Latch Current | IFL | 5 | 10 | 20 | mA | VF = 1.2 V, TA = 25°C |
| Input Current at Zero Output Current | IF0 | 0.1 | 0.5 | 1 | mA | VF = 1.2 V, TA = 25°C |
| Forward Voltage Drop | VF | - | 1.2 | 1.5 | V | IF = 20 mA, TA = 25°C |
| Isolation Voltage (RMS) | VIORMS | - | - | 4000 | V | Test Condition: 1 minute, 50/60 Hz |
| Operating Temperature Range | TA | -40 | - | 105 | °C | - |
| Storage Temperature Range | TSTG | -40 | - | 125 | °C | - |
Instructions for Use:
Mounting and Handling:
- Handle the MOC634A with care to avoid mechanical stress.
- Ensure proper mounting to prevent thermal issues.
Electrical Connections:
- Connect the input side (LED) to the control circuit.
- Connect the output side (triac) to the load and power supply.
- Ensure all connections are secure and free from short circuits.
Input Drive:
- The input current (IF) should be within the specified range to ensure reliable operation.
- Avoid exceeding the maximum input current to prevent damage.
Output Load:
- The load current should not exceed the maximum continuous output current (IT(AV)) or the peak repetitive peak on-state current (ITSM).
- Use appropriate heat sinking if operating near the maximum current ratings.
Isolation:
- The device provides high isolation voltage (VIORMS). Ensure that the isolation requirements of your application are met.
Temperature Considerations:
- Operate the device within the specified temperature ranges to ensure reliability and longevity.
- Provide adequate cooling if operating in high-temperature environments.
Testing and Troubleshooting:
- Test the device under controlled conditions to verify proper operation.
- If issues arise, check for proper connections, correct input drive, and load conditions.
Storage:
- Store the device in a dry, cool place to prevent degradation.
- Follow recommended storage practices to maintain performance.
By following these guidelines, you can ensure the reliable and efficient operation of the MOC634A optocoupler.
(For reference only)Inquiry - MOC634A
