Instructions for Use:

1. Supply Voltage (VIN):

   • Ensure the input voltage is within the specified range of 2.7V to 5.5V.
   • Connect the input voltage to the VIN pin.

2. Output Voltage (VOUT):

   • The output voltage is fixed at 3.3V. No external components are required for voltage regulation.
   • Connect the load to the VOUT pin.

3. Output Current (IOUT):

   • The device can provide up to 800mA of continuous output current.
   • Ensure the load does not exceed this limit to avoid overheating or damage.

4. Quiescent Current (IQ):

   • The quiescent current is typically 1.5mA when there is no load.
   • This should be considered in low-power applications.

5. Dropout Voltage (VDROPOUT):

   • The dropout voltage is typically 0.3V at maximum load.
   • Ensure the input voltage is at least 0.3V higher than the output voltage to maintain regulation.

6. Load Regulation:

   • The change in output voltage due to load variations is typically 0.5%.
   • This ensures stable output under varying load conditions.

7. Line Regulation:

   • The change in output voltage due to input voltage variations is typically 0.2%.
   • This ensures stable output even with fluctuations in the input voltage.

8. Thermal Shutdown (TSD):

   • The device will shut down if the junction temperature exceeds 160°C.
   • Ensure adequate heat dissipation to prevent thermal shutdown.

9. Operating Temperature (TOPR):

   • The device operates reliably within the temperature range of -40°C to 85°C.
   • Avoid operating outside this range to prevent performance degradation or failure.

10. Storage Temperature (TSTG):

    • The device can be stored within the temperature range of -65°C to 150°C.
    • Ensure proper storage conditions to maintain device integrity.