Instructions for AD7715ANZ-5 DIP16

1. Power Supply:

   • Connect the supply voltage (VDD) to pin 16 and ground (GND) to pin 8.
   • Ensure the supply voltage is within the range of 2.7V to 5.25V.

2. Reference Voltage:

   • Connect the reference voltage (VREF) to pin 15. The reference voltage should be between 2.5V and 5V.

3. Analog Input:

   • Connect the analog input signals to the differential input pins (AIN1+, AIN1-, AIN2+, AIN2-).
   • The input voltage range should be from 0V to the reference voltage (VREF).

4. Digital Interface:

   • Connect the digital interface pins (SCLK, DIN, DOUT, DRDY) to your microcontroller or digital system.
   • SCLK: Serial Clock
   • DIN: Data In
   • DOUT: Data Out
   • DRDY: Data Ready

5. Configuration:

   • Use the configuration register to set the desired parameters such as conversion rate, gain, and input channel selection.
   • Refer to the datasheet for detailed register settings and command sequences.

6. Operation:

   • Initiate a conversion by writing to the appropriate register.
   • Wait for the DRDY pin to go low, indicating that the conversion is complete.
   • Read the conversion result from the DOUT pin using the SPI protocol.

7. Temperature Considerations:

   • Ensure the operating temperature is within the range of -40°C to 85°C.
   • Store the device in temperatures ranging from -65°C to 150°C.

8. Handling and Storage:

   • Handle the device with care to avoid damage to the pins and internal components.
   • Store the device in a dry, cool place away from direct sunlight and high humidity.

For more detailed information, refer to the AD7715ANZ-5 datasheet provided by Analog Devices.