Instructions for Using XIO3130ZHC

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the range of 2.7V to 5.5V.
   • Connect the VCC pin to the power source and GND pin to the ground.

2. Input Signals:

   • The input pins should be driven with logic levels compatible with the supply voltage.
   • Ensure the input leakage current (IIL) does not exceed 1.0 μA.

3. Output Configuration:

   • Each output channel can sink up to 16 mA.
   • When the output is low, the voltage (VOL) will be approximately 0.4V.
   • When the output is high, the voltage (VOH) will be approximately VCC - 0.4V.

4. Temperature Considerations:

   • The operating temperature range is from -40°C to 85°C.
   • Store the device in an environment between -65°C and 150°C.

5. Propagation Delay:

   • The typical propagation delay time (tpd) is 10 ns. This is the time it takes for the output to respond to a change in the input signal.

6. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store in a dry, cool place to prevent moisture damage.

7. Schematic and Layout:

   • Refer to the datasheet for recommended PCB layout and schematic diagrams to ensure optimal performance and reliability.

8. Testing:

   • Before finalizing the design, test the device under various conditions to ensure it meets the required specifications.

For more detailed information, refer to the datasheet provided by the manufacturer.