Share:
Specifications
SKU: 9382692
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Collector-Emitter Voltage | VCE | - | - | 80 | V | - |
| Base-Emitter Voltage | VBE | - | 1.8 | 2.5 | V | IC = 150 mA, TA = 25°C |
| Collector Current | IC | - | - | 150 | mA | - |
| Base Current | IB | - | - | 15 | mA | - |
| DC Current Gain | hFE | 100 | 300 | 700 | - | IC = 150 mA, VCE = 10 V, TA = 25°C |
| Transition Frequency | fT | - | 250 | 400 | MHz | IC = 150 mA, VCE = 10 V, TA = 25°C |
| Power Dissipation | PT | - | - | 625 | mW | TA = 25°C |
| Storage Temperature Range | TSTG | -55 | - | 150 | °C | - |
| Operating Temperature Range | TA | -55 | - | 150 | °C | - |
Instructions for Use:
- Handling: Handle the 2SC3399-AC with care to avoid damage. Use proper ESD (Electrostatic Discharge) precautions.
- Mounting: Ensure that the transistor is securely mounted to the PCB (Printed Circuit Board) using appropriate soldering techniques. Avoid excessive heat during soldering.
- Biasing: Properly bias the base-emitter junction to ensure stable operation. Refer to the typical operating conditions for recommended biasing values.
- Dissipation: Ensure adequate heat dissipation if operating near the maximum power dissipation limit. Consider using a heatsink if necessary.
- Storage: Store the transistor in a dry, cool place away from direct sunlight and sources of heat.
- Testing: Before final assembly, test the transistor using a multimeter or transistor tester to verify its functionality.
- Derating: For extended reliability, derate the maximum ratings based on the ambient temperature and operating conditions.
- Compliance: Ensure that the use of the 2SC3399-AC complies with all relevant safety and regulatory standards.
Inquiry - 2SC3399-AC
