Share:
Specifications
SKU: 9459890
NEW
| Parameter | Description | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage (VCC) | Operating supply voltage range | 1.65 | - | 5.5 | V |
| Input Low Voltage (VIL) | Maximum input low voltage | - | - | 0.8 | V |
| Input High Voltage (VIH) | Minimum input high voltage | 2.0 | - | - | V |
| Output Low Voltage (VOL) | Maximum output low voltage at IOL = 4 mA | - | - | 0.4 | V |
| Output High Voltage (VOH) | Minimum output high voltage at IOH = -4 mA | 2.4 | - | - | V |
| Propagation Delay Time (tpd) | Time delay from input to output | - | 6.5 | - | ns |
| Power Dissipation (Ptot) | Total power dissipation | - | - | 330 | mW |
| Operating Temperature Range (TA) | Ambient operating temperature range | -40 | - | 85 | °C |
| Storage Temperature Range (TSTG) | Storage temperature range | -65 | - | 150 | °C |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VCC) is within the specified range of 1.65V to 5.5V.
- Connect the VCC pin to the positive supply and the GND pin to the ground.
Input Signals:
- Input signals should be within the valid logic levels:
- Low: 0V to 0.8V
- High: 2.0V to VCC
- Avoid floating inputs; use pull-up or pull-down resistors if necessary.
- Input signals should be within the valid logic levels:
Output Signals:
- The output will be driven to a low level (VOL ≤ 0.4V) when the input is low.
- The output will be driven to a high level (VOH ≥ 2.4V) when the input is high.
- Ensure the load connected to the output does not exceed the maximum current ratings.
Propagation Delay:
- The typical propagation delay time (tpd) is 6.5 ns. This is the time it takes for the output to change state after the input changes.
Thermal Management:
- Operate the device within the ambient temperature range of -40°C to 85°C.
- Store the device within the storage temperature range of -65°C to 150°C.
Handling:
- Handle the device with care to avoid static damage.
- Follow proper ESD (Electrostatic Discharge) precautions when handling the device.
Mounting:
- Solder the device according to the recommended soldering profile to ensure reliable connections.
- Ensure proper mechanical support and avoid excessive mechanical stress on the package.
By following these guidelines, you can ensure optimal performance and reliability of the SN74LVC2G04DBVTE4 device.
(For reference only)Inquiry - SN74LVC2G04DBVTE4
