Share:
Specifications
SKU: 9481426
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Collector-Emitter Voltage | VCE(off) | IC = 0, Tj = 25°C | - | 900 | - | V |
| Gate-Emitter Voltage | VGE(off) | IG = 0, Tj = 25°C | -20 | - | 20 | V |
| Continuous Collector Current | IC | TC = 25°C | - | 60 | - | A |
| Pulse Collector Current | IC(rms) | tp = 10 ms, TC = 25°C | - | 180 | - | A |
| Collector-Emitter Saturation Voltage | VCE(sat) | IC = 60 A, VGE = 15 V, Tj = 25°C | - | 1.8 | - | V |
| Turn-On Time | ton | IC = 60 A, VCE = 400 V, VGE = 15 V | - | 0.7 | - | μs |
| Turn-Off Time | toff | IC = 60 A, VCE = 400 V, VGE = -15 V | - | 1.5 | - | μs |
| Total Storage Time | tstg | IC = 60 A, VCE = 400 V, VGE = 15 V | - | 10 | - | μs |
| Junction to Case Thermal Resistance | Rth(j-c) | - | - | 0.5 | K/W | |
| Junction to Ambient Thermal Resistance | Rth(j-a) | - | - | 40 | K/W |
Instructions for Use:
Mounting and Handling:
- Ensure that the device is mounted on a suitable heatsink to maintain the junction temperature within safe limits.
- Handle the device with care to avoid mechanical damage and static electricity.
Electrical Connections:
- Connect the collector (C), emitter (E), and gate (G) terminals correctly to avoid damage.
- Use appropriate wire gauges and connectors to handle the rated current.
Thermal Management:
- Monitor the junction temperature (Tj) to ensure it does not exceed the maximum allowable value.
- Use thermal paste between the device and the heatsink to improve heat dissipation.
Gate Drive:
- Provide a sufficient gate-emitter voltage (VGE) to ensure proper turn-on and turn-off characteristics.
- Use a gate resistor to control the switching speed and reduce electromagnetic interference (EMI).
Overcurrent Protection:
- Implement overcurrent protection to prevent damage from excessive collector current (IC).
- Consider using a current-limiting circuit or a fuse.
Storage and Operating Conditions:
- Store the device in a dry, cool place away from direct sunlight.
- Operate the device within the specified temperature and voltage ranges to ensure reliable performance.
Testing:
- Perform initial testing at low power levels to verify correct operation before applying full load.
- Regularly inspect the device and connections for signs of wear or damage.
For detailed application notes and further information, refer to the datasheet provided by Toshiba.
(For reference only)Inquiry - GT60M321 IGBT 60A 900V TOSHIBA TO3PL
