Share:


2SD1404 D1404 TO220F TOSHIBA

Specifications

SKU: 9482001

BUY 2SD1404 D1404 TO220F TOSHIBA https://www.utsource.net/itm/p/9482001.html

Parameter Symbol Min Typical Max Unit
Collector-Emitter Voltage VCEO - - 60 V
Collector-Base Voltage VCBO - - 80 V
Emitter-Base Voltage VEBO - - 5 V
Collector Current IC - - 3 A
Base Current IB - - 0.3 A
Power Dissipation PT - - 65 W
Junction Temperature TJ - - 150 °C
Storage Temperature TSTG -55 - 150 °C
Thermal Resistance RthJC - 1.5 - °C/W

Instructions for Use:

  1. Mounting:

    • Ensure that the mounting surface is clean and flat.
    • Use a suitable heat sink to dissipate heat effectively.
    • Apply thermal compound between the transistor and the heat sink to improve thermal conductivity.
  2. Electrical Connections:

    • Connect the collector (C) to the high voltage side of the circuit.
    • Connect the emitter (E) to the low voltage side or ground.
    • Connect the base (B) to the control circuit, ensuring that the base current is within the specified limits.
  3. Operating Conditions:

    • Do not exceed the maximum ratings listed in the table.
    • Ensure that the junction temperature does not exceed 150°C.
    • Operate within the safe operating area (SOA) to avoid damage to the device.
  4. Handling:

    • Handle with care to avoid mechanical stress.
    • Use appropriate ESD protection to prevent damage from static electricity.
  5. Storage:

    • Store in a dry, cool place.
    • Keep away from direct sunlight and extreme temperatures.
  6. Testing:

    • Use a multimeter or transistor tester to verify the functionality of the device.
    • Test the device under controlled conditions to ensure it meets the required specifications.
  7. Disposal:

    • Dispose of the device according to local regulations for electronic waste.
(For reference only)

 Inquiry - 2SD1404 D1404 TO220F TOSHIBA