Instructions for Use:

1. Handling and Storage:

   • Store in a dry, cool environment to prevent moisture damage.
   • Handle with care to avoid mechanical stress or damage to the leads.

2. Soldering:

   • Preheat the PCB to 100°C to 120°C before soldering.
   • Use a soldering iron with a temperature of 350°C to 380°C.
   • Soldering time should not exceed 3 seconds per joint.
   • Avoid excessive heat and mechanical stress during soldering.

3. Mounting:

   • Ensure that the resistor array is aligned correctly on the PCB.
   • Use a suitable flux for soldering to ensure good electrical connections.
   • Inspect the solder joints visually and with an ohmmeter to ensure proper connection.

4. Testing:

   • Test the resistance values using a multimeter to ensure they meet the specified tolerance.
   • Check for any short circuits or open circuits.

5. Application:

   • Suitable for use in various applications such as voltage dividers, biasing circuits, and signal conditioning.
   • Ensure the power rating and operating temperature range are suitable for the application.

6. Disposal:

   • Dispose of the product in accordance with local environmental regulations.