Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking if operating at high currents or in high ambient temperatures.
   • Use a flat surface for mounting to ensure good thermal contact.

2. Soldering:

   • Preheat the PCB to 100°C to 150°C before soldering.
   • Soldering temperature should not exceed 260°C.
   • Soldering time should not exceed 10 seconds per connection.

3. Electrical Connections:

   • Connect the anode (A) to the positive side of the circuit.
   • Connect the cathode (K) to the negative side of the circuit.
   • Ensure that the reverse voltage does not exceed 100V to avoid breakdown.

4. Handling:

   • Handle with care to avoid mechanical damage.
   • Use anti-static precautions to prevent ESD damage.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready to use.

6. Testing:

   • Test the diode using a multimeter to ensure it is functioning correctly.
   • Measure the forward voltage drop (VF) and ensure it is within the typical range.

7. Safety:

   • Do not exceed the maximum ratings specified in the table.
   • Ensure adequate ventilation when soldering to avoid inhaling fumes.