Instructions for Use:

1. Handling:

   • Handle the capacitor with care to avoid mechanical damage.
   • Avoid touching the leads or body with bare hands to prevent contamination.

2. Mounting:

   • Ensure that the leads are inserted into the correct holes on the PCB.
   • Solder the leads quickly to avoid overheating the component.
   • Trim the leads to a length of approximately 1-2 mm after soldering.

3. Polarity:

   • This capacitor is non-polarized and can be installed in either direction.

4. Operating Conditions:

   • Do not exceed the maximum voltage rating of 50 V DC.
   • Ensure the operating temperature remains within the specified range of -55°C to +85°C.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Avoid exposure to corrosive environments.

6. Testing:

   • Use a capacitance meter to verify the capacitance value before installation.
   • Check for any visual signs of damage or wear before use.

7. Disposal:

   • Dispose of the capacitor in accordance with local environmental regulations.
   • Do not incinerate the capacitor as it may release harmful substances.