Instructions for Use:

1. Power Supply:

   • The NJM4558D can operate with a supply voltage ranging from 2.0V to 16.0V.
   • For optimal performance, use a dual supply (e.g., ±15V).

2. Quiescent Current:

   • The quiescent current is typically 0.9mA at a supply voltage of ±15V.

3. Output Voltage Swing:

   • The output voltage swing is typically 28Vpp when connected to a 600Ω load and a supply voltage of ±15V.

4. Input Offset Voltage:

   • The input offset voltage is typically 2mV.

5. Input Bias Current:

   • The input bias current is typically 20nA.

6. Input Impedance:

   • The input impedance is typically 2MΩ.

7. Slew Rate:

   • The slew rate is typically 0.3V/μs.

8. Common Mode Rejection Ratio (CMRR):

   • The CMRR is typically 80dB at a frequency of 1kHz.

9. Power Supply Rejection Ratio (PSRR):

   • The PSRR is typically 80dB at a frequency of 1kHz.

10. Bandwidth:

    • The bandwidth is typically 1.2MHz.

11. Total Harmonic Distortion (THD):

    • The THD is typically 0.01% at an output voltage of 2Vrms, a load of 600Ω, and a frequency of 1kHz.

General Usage Tips:

• Ensure that the power supply voltages are within the specified range to avoid damage to the device.
• Use decoupling capacitors close to the power supply pins to reduce noise and improve stability.
• For audio applications, consider using bypass capacitors on the inputs and outputs to filter out unwanted frequencies.
• Always refer to the datasheet for more detailed information and specific application notes.