Instructions:

1. Power Supply:

   • Ensure the supply voltage is within the specified range of 3.8V to 30V.
   • Connect the Vcc pin to the positive power supply and GND pin to the ground.

2. Output Connection:

   • The output pin (OUT) will sink current when the magnetic field exceeds the Bop threshold.
   • Connect the output pin to the load or input of the next stage circuit.

3. Magnetic Field Orientation:

   • Position the sensor such that the magnetic field lines are perpendicular to the sensitive area of the sensor.
   • Use a north pole to activate the sensor (switch on) and a south pole to deactivate it (switch off).

4. Thermal Management:

   • Ensure the operating temperature does not exceed 150°C.
   • Provide adequate cooling if the sensor is used in high-temperature environments.

5. Handling:

   • Handle with care to avoid mechanical damage.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage to the component.

6. Storage:

   • Store the component in a dry place within the temperature range of -40°C to 150°C.
   • Avoid exposure to corrosive environments.

7. Mounting:

   • Use a reflow soldering process suitable for SOT-23 packages.
   • Ensure proper alignment and soldering to avoid shorts or open circuits.