Share:
Specifications
SKU: 9529610
| Parameter | Symbol | Min | Typ | Max | Unit | Condition |
|---|---|---|---|---|---|---|
| Forward Voltage | VF | - | 1.2 | 1.6 | V | IF = 10 mA |
| Reverse Voltage | VRRM | - | - | 5 | V | |
| Continuous Forward Current | IF | - | - | 30 | mA | |
| Peak Forward Current | IF(surge) | - | - | 100 | mA | t = 1 s, duty cycle 2% |
| Collector-Emitter Voltage | VCEO | - | - | 30 | V | IC = 5 mA, TA = 25°C |
| Collector Current | IC | - | - | 5 | mA | VCE = 5 V |
| Output Leakage Current | ICEO | - | 100 | 500 | nA | VCE = 30 V, IF = 0 mA |
| Isolation Voltage | VIORM | - | - | 1500 | VRMS | 1 min, 50/60 Hz |
| Operating Temperature | TOP | -40 | - | 85 | °C | |
| Storage Temperature | TSTG | -40 | - | 125 | °C |
Instructions:
Handling Precautions:
- Handle with care to avoid mechanical damage.
- Use appropriate ESD (Electrostatic Discharge) protection when handling.
Mounting:
- Ensure proper alignment of the component during soldering.
- Avoid excessive heat during soldering; recommended temperature is 260°C for 10 seconds.
Operating Conditions:
- Do not exceed the maximum ratings listed in the table.
- Ensure the operating temperature is within the specified range.
Testing:
- Test the device under controlled conditions to ensure it meets the required specifications.
- Use a multimeter or appropriate testing equipment to verify parameters such as forward voltage and leakage current.
Storage:
- Store in a dry, cool place away from direct sunlight.
- Follow recommended storage conditions to maintain component integrity.
Applications:
- Suitable for general-purpose signal isolation and switching applications.
- Commonly used in industrial control systems, communication interfaces, and power supply circuits.
Inquiry - TLP521-1 DIP4 P521-1
