Share:
Specifications
SKU: 9529733
IC INTERFACE SPECIALIZED 40DIP
| Parameter | Description | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| VDD | Supply Voltage | 4.5 | 5.0 | 5.5 | V |
| IDD | Supply Current (Typical) | - | 25 | - | mA |
| VIH | Input High Voltage | 3.5 | - | 5.5 | V |
| VIL | Input Low Voltage | 0 | - | 1.5 | V |
| VOH | Output High Voltage | 2.4 | 4.7 | 5.0 | V |
| VOL | Output Low Voltage | 0 | 0.4 | 0.5 | V |
| IOH | Output High Current | -1 | - | - | mA |
| IOL | Output Low Current | - | - | 8 | mA |
| tpd | Propagation Delay Time | 12 | 22 | 34 | ns |
| tphl | High-to-Low Propagation Delay | 12 | 22 | 34 | ns |
| tplh | Low-to-High Propagation Delay | 12 | 22 | 34 | ns |
| tskew | Skew | - | 5 | 10 | ns |
| tslew | Slew Rate | - | 15 | 25 | ns/V |
Instructions for Using Z84C4110PEC
Supply Voltage (VDD):
- Ensure the supply voltage is within the range of 4.5V to 5.5V to avoid damage to the device.
- Use a stable power source to maintain consistent operation.
Supply Current (IDD):
- The typical supply current is 25mA. Design your power supply to handle this current requirement.
Input Voltage Levels (VIH, VIL):
- For a valid high input, the voltage should be between 3.5V and 5.5V.
- For a valid low input, the voltage should be between 0V and 1.5V.
Output Voltage Levels (VOH, VOL):
- The output high voltage will typically be between 2.4V and 5.0V.
- The output low voltage will typically be between 0V and 0.5V.
Output Current (IOH, IOL):
- The device can sink up to 8mA when the output is low.
- The device can source up to 1mA when the output is high.
Propagation Delay (tpd, tphl, tplh):
- The propagation delay time from input to output is between 12ns and 34ns.
- Ensure that your system timing accounts for these delays.
Skew (tskew):
- The skew, or the difference in propagation delay between different outputs, is between 5ns and 10ns.
Slew Rate (tslew):
- The slew rate, or the rate of change of the output voltage, is between 15ns/V and 25ns/V.
Handling and Storage:
- Store the device in a dry, cool place to prevent moisture damage.
- Handle the device with care to avoid static discharge, which can damage the internal circuits.
Mounting and Soldering:
- Follow standard surface mount technology (SMT) procedures for mounting and soldering.
- Ensure that the soldering temperature and time do not exceed the maximum ratings specified in the datasheet.
Testing:
- Before integrating the device into your system, test it with a known good setup to ensure proper functionality.
- Use appropriate test equipment to verify all parameters and performance characteristics.
By following these guidelines, you can ensure reliable and efficient operation of the Z84C4110PEC in your application.
(For reference only)Inquiry - Z84C4110PEC
