Instructions for ADAU1966WBSTZ

1. Power Supply:

   • Connect the VDD pin to a stable power supply between 2.7V and 3.6V.
   • Ensure that the power supply is clean and has adequate filtering to avoid introducing noise into the system.

2. Analog Input:

   • Apply analog signals to the VIN pins with a peak-to-peak voltage range of 0V to 1.2V.
   • Use appropriate signal conditioning circuits if the input signal exceeds this range.

3. Digital Output Configuration:

   • Set the digital output data rate (fODR) to a value between 8kHz and 96kHz using the configuration registers or external control signals.
   • Ensure that the digital output is connected to a compatible receiver or processor.

4. Signal-to-Noise Ratio (SNR):

   • The typical SNR of 94dB is achieved under standard operating conditions.
   • Use shielded cables and proper grounding to minimize external noise interference.

5. Total Harmonic Distortion (THD+N):

   • The typical THD+N of 0.005% is achieved under standard operating conditions.
   • Avoid overdriving the input to prevent distortion.

6. Power Consumption:

   • The typical power consumption is 20mA at 3.3V and 48kHz ODR.
   • Use low-power modes or reduce the ODR to further lower power consumption if necessary.

7. Operating Temperature:

   • Operate the device within the temperature range of -40°C to 85°C to ensure reliable performance.
   • Avoid exposing the device to temperatures outside this range for extended periods.

8. Storage Temperature:

   • Store the device in a dry environment with temperatures between -65°C and 150°C.
   • Avoid exposure to high humidity and corrosive environments.

9. Handling and Installation:

   • Handle the device with care to avoid static discharge and physical damage.
   • Follow proper soldering techniques and reflow profiles during installation to ensure reliable connections.

10. Configuration and Programming:

    • Refer to the device datasheet and application notes for detailed information on configuration registers and programming interfaces.
    • Use a microcontroller or other compatible device to configure and control the ADAU1966WBSTZ.