Instructions for ST62T20CM3

1. Supply Voltage (VDD):

   • Ensure the supply voltage is within the range of 1.8V to 5.5V.
   • Avoid exceeding the maximum voltage to prevent damage to the device.

2. Operating Temperature (Toper):

   • The device operates reliably between -40°C and 85°C.
   • Ensure the ambient temperature does not exceed these limits.

3. Storage Temperature (Tstg):

   • Store the device in an environment where the temperature ranges from -65°C to 150°C.

4. Maximum Current (IDD):

   • The typical operating current is 100μA. Ensure that the power supply can handle this current.

5. Output Low Voltage (VOL):

   • When the output is low, the voltage should be between 0.4V and 0.8V at VDD = 5V.

6. Output High Voltage (VOH):

   • When the output is high, the voltage should be between 4.2V and VDD at VDD = 5V.

7. Input Low Voltage (VIL):

   • The input is considered low when the voltage is between 0.8V and 1.5V.

8. Input High Voltage (VIH):

   • The input is considered high when the voltage is between 3.0V and VDD.

9. Propagation Delay Time (tpd):

   • The typical propagation delay time is 20ns with a maximum of 50ns.

10. Power-down Mode Current (IDDp):

    • In power-down mode, the current consumption is typically 1μA.

11. Output Short-Circuit Current (Iosc):

    • The output can handle a short-circuit current of up to 20mA.

Additional Notes:

• Always refer to the datasheet for the most accurate and detailed information.
• Ensure proper decoupling capacitors are used to stabilize the power supply.
• Follow the recommended PCB layout guidelines to ensure optimal performance and reliability.