Below is the parameter table and instructions for the 3296Y-1-201LF potentiometer.

Parameter Table

Instructions

1. Installation:

   • Preparation: Ensure that the PCB or mounting surface is clean and free from any debris.
   • Positioning: Align the potentiometer with the mounting holes on the PCB.
   • Insertion: Insert the leads of the potentiometer through the holes on the PCB.
   • Soldering: Solder the leads to the PCB pads, ensuring a secure connection. Avoid overheating the leads during soldering.
   • Trimming: If necessary, trim the leads to a suitable length after soldering.

2. Adjustment:

   • Tool Selection: Use a small flat-head screwdriver or a dedicated potentiometer adjustment tool.
   • Initial Adjustment: Turn the shaft to the desired resistance value. The potentiometer has a 300° rotation angle and 10 turns, allowing for precise adjustments.
   • Fine-Tuning: For fine-tuning, make small adjustments while monitoring the output with a multimeter or other measuring device.

3. Handling:

   • Care: Handle the potentiometer with care to avoid damaging the delicate components.
   • Storage: Store the potentiometer in a dry, cool place away from direct sunlight and extreme temperatures.

4. Maintenance:

   • Cleaning: If the potentiometer becomes dirty, use a soft, dry cloth to gently clean the exterior. Do not use solvents or abrasive materials.
   • Lubrication: If the potentiometer becomes stiff, a small amount of electrical contact cleaner can be applied to the wiper contacts.

By following these instructions, you can ensure the proper installation and operation of the 3296Y-1-201LF potentiometer.