Instructions for Use

1. Installation:

   • Ensure the power supply is installed in a well-ventilated area to prevent overheating.
   • Mount the power supply on a DIN rail or panel using the provided mounting hardware.
   • Connect the input voltage to the screw terminals, ensuring correct polarity.
   • Connect the load to the output terminals, ensuring correct polarity.

2. Operation:

   • Turn on the input power source.
   • Monitor the output voltage and current to ensure they meet the required specifications.
   • If the power supply is used in a high-temperature environment, ensure adequate airflow (1.5 m/s).

3. Maintenance:

   • Regularly inspect the power supply for signs of wear or damage.
   • Clean the power supply and its surroundings to prevent dust accumulation.
   • Do not operate the power supply if any protective features have been compromised.

4. Troubleshooting:

   • No Output Voltage: Check input connections, ensure correct polarity, and verify the input voltage.
   • Overheating: Ensure proper ventilation and check for blockages in the cooling system.
   • Surge Protection Triggered: Disconnect the power supply and inspect for short circuits or overloads.

5. Safety Precautions:

   • Always disconnect the power supply from the input source before performing any maintenance or installation.
   • Do not open the power supply housing as it contains high-voltage components.
   • Follow all local electrical codes and regulations when installing and operating the power supply.