Instructions for Use:

1. Power Supply:

   • Connect the Vcc pin to the positive terminal of the power supply.
   • Ensure the operating voltage is within the range of 2.0V to 5.5V.

2. Ground Connection:

   • Connect the GND pin to the negative terminal of the power supply.

3. Output Connection:

   • The output is an NPN open collector type. Connect the load between the output pin and the positive supply.
   • Ensure the maximum load current does not exceed 50mA.

4. Sensing Distance:

   • The sensor has a typical sensing distance of 1.5mm, with a range of 1.0mm to 2.0mm.
   • Adjust the position of the sensor to achieve the desired detection range.

5. Response and Release Time:

   • The response time (Tr) and release time (Tf) are both typically 1ms.
   • These times may vary slightly depending on environmental conditions.

6. Temperature Considerations:

   • The sensor can operate within a temperature range of -40°C to 85°C.
   • Store the sensor in a temperature range of -40°C to 125°C.

7. Mounting:

   • Mount the sensor in a stable position to avoid mechanical stress.
   • Ensure there is no interference from nearby objects that could affect the sensing distance.

8. Wiring:

   • Use appropriate wire gauges to minimize voltage drops and ensure reliable operation.
   • Shield cables if used in noisy environments to prevent electromagnetic interference.

9. Maintenance:

   • Regularly inspect the sensor for any signs of damage or wear.
   • Clean the sensor surface if necessary to maintain optimal performance.

10. Safety:

    • Do not exceed the maximum ratings specified in the table.
    • Follow all relevant safety guidelines when handling and installing the sensor.