Instructions for Use:

1. Supply Voltage:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 5.5V.
   • Do not exceed the maximum supply voltage to avoid damage.

2. Input Voltage:

   • The input voltage (Vin) should be between 0V and Vcc.
   • Avoid applying voltages outside this range to prevent damage.

3. Output Voltage:

   • The output voltage high (Voh) will typically be Vcc - 0.4V.
   • The output voltage low (Vol) will typically be 0.4V or less.

4. Current Ratings:

   • The input current (Iin) should not exceed 20μA.
   • The output current when high (Ioh) can be up to 16mA.
   • The output current when low (Iol) can be up to 16mA.

5. Propagation Delay:

   • The typical propagation delay (tpd) is 10ns with a maximum of 20ns.

6. Power Dissipation:

   • The device can dissipate up to 100mW of power.

7. Temperature Ranges:

   • The operating temperature (Topr) range is from -40°C to 85°C.
   • The storage temperature (Tstg) range is from -65°C to 150°C.

8. Handling:

   • Handle the device with care to avoid static damage.
   • Use appropriate ESD protection measures during handling and installation.

9. Mounting:

   • Ensure proper mounting and soldering techniques to avoid thermal and mechanical stress.
   • Follow the recommended PCB layout guidelines for optimal performance.

10. Testing:

    • Perform initial testing at room temperature to verify functionality.
    • Conduct extended tests over the full operating temperature range to ensure reliability.