Instructions for A1360:

1. Power Supply: Connect the VCC pin to a power supply within the operating voltage range (3.8V to 28V).
2. Ground Connection: Ensure the GND pin is connected to the ground.
3. Output Connection: The OUT pin is an open collector output. Connect it to a pull-up resistor and the desired load.
4. Magnetic Field Sensing: Place the sensor in the magnetic field to be detected. The output will switch based on the magnetic field strength.
5. Operating Temperature: Ensure the sensor operates within the temperature range of -40°C to 150°C.

Instructions for C3423:

1. Capacitance Selection: Choose the appropriate capacitance value (10μF, 22μF, 33μF, 47μF, 100μF) based on your application requirements.
2. Voltage Rating: Ensure the selected capacitor has a voltage rating suitable for your circuit (50V, 100V, 160V, 250V).
3. Polarity: For electrolytic capacitors, ensure the positive lead is connected to the higher potential and the negative lead to the lower potential.
4. Ripple Current: Consider the ripple current rating (150mA, 200mA, 300mA) to avoid overheating and damage.
5. Operating Temperature: Ensure the capacitor operates within the temperature range of -55°C to +125°C.
6. Mounting: Mount the capacitor securely to prevent mechanical stress and ensure good electrical connections.