Share:
Specifications
SKU: 9896735
IC RECEIVER 0/3 100HTQFP
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2.7 | 3.3 | 5.5 | V | Operating supply voltage range |
| Standby Current | ISB | - | 10 | - | μA | Current consumption in standby mode |
| Operating Temperature | TOPR | -40 | - | 85 | °C | Operating temperature range |
| Storage Temperature | TSTG | -65 | - | 150 | °C | Storage temperature range |
| Differential Input Range | VIN | -0.3 | - | VDD+0.3 | V | Maximum differential input voltage range |
| Output Voltage Swing | VOUT | -0.3 | - | VDD-0.3 | V | Output voltage swing range |
| Slew Rate | SR | - | 10 | - | V/μs | Slew rate of the output stage |
| Bandwidth | BW | - | 10 | - | MHz | Small-signal bandwidth |
| CMRR | CMRR | - | 80 | - | dB | Common-mode rejection ratio at 1 kHz |
| PSRR | PSRR | - | 70 | - | dB | Power supply rejection ratio at 1 kHz |
| THD+N | THD+N | - | 0.1 | - | % | Total harmonic distortion plus noise (at 1 kHz, 1 Vpp) |
| ESD Rating | HBM | - | 2000 | - | V | Human body model electrostatic discharge rating |
Instructions for Use:
Power Supply:
- Ensure the supply voltage is within the specified range (2.7V to 5.5V).
- Use a stable power source to avoid fluctuations that can affect performance.
Input Signal:
- The differential input voltage should not exceed the specified range (-0.3V to VDD + 0.3V).
- Avoid applying signals with excessive amplitude to prevent damage to the device.
Output Configuration:
- The output voltage swing should be within the specified limits (-0.3V to VDD - 0.3V).
- Use appropriate load resistors to match the output impedance of the device.
Temperature Considerations:
- Operate the device within the specified temperature range (-40°C to 85°C).
- Store the device within the storage temperature range (-65°C to 150°C).
Electrostatic Discharge (ESD):
- Handle the device with care to avoid ESD damage.
- Use proper grounding and ESD protection measures during handling and assembly.
Performance Optimization:
- For optimal performance, ensure the device is properly decoupled with capacitors close to the power pins.
- Use a clean and stable reference voltage for best results.
Testing and Evaluation:
- When testing the device, use a signal generator with known characteristics to verify performance parameters.
- Measure THD+N, CMRR, and PSRR using standard test setups and equipment.
By following these guidelines, you can ensure reliable and efficient operation of the TFP401APZPR.
(For reference only)Inquiry - TFP401APZPR
