Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the operating range of 2.7V to 5.5V.
   • Connect the power supply to the V_CC pin and ground to the GND pin.

2. Enable/Shutdown Control:

   • To enable the device, apply a high logic level (V_IH) to the SHDN pin.
   • To shut down the device, apply a low logic level (V_IL) to the SHDN pin.
   • The shutdown current (I_SD) is typically 1μA when the device is in shutdown mode.

3. Output Configuration:

   • The output can source or sink up to 100mA of current.
   • When sourcing current, the output voltage (V_OH) should be between 2.4V and 5.0V.
   • When sinking current, the output voltage (V_OL) should be between 0V and 0.4V.

4. Timing Parameters:

   • The propagation delay (t_pd) is typically 10ns.
   • The rise time (t_r) and fall time (t_f) are both typically 3ns.

5. Temperature Considerations:

   • The device operates within a temperature range of -40°C to 85°C.
   • Store the device in an environment with a temperature range of -65°C to 150°C.

6. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry, cool place to prevent moisture damage.

7. Package Information:

   • The MAX3845UCQ+D is typically available in a surface-mount package.
   • Follow standard PCB design guidelines for proper placement and soldering.

8. Testing and Validation:

   • After assembly, test the device under typical operating conditions to ensure it meets the specified parameters.
   • Verify the functionality by checking the output voltage levels and current capabilities.