Share:
Specifications
SKU: 10061754
| Parameter | Description | Value |
|---|---|---|
| Part Number | Device Part Number | MCC56-16IO1B |
| Type | Type of Device | I/O Module |
| Number of Channels | Number of Input/Output Channels | 16 |
| Input Voltage Range | Range of Input Voltage | 0 to 30 V |
| Output Voltage Range | Range of Output Voltage | 0 to 30 V |
| Current per Channel | Maximum Current per Channel | 20 mA |
| Total Current | Maximum Total Current | 320 mA |
| Communication Protocol | Supported Communication Protocol | Modbus RTU |
| Operating Temperature | Operating Temperature Range | -40°C to 85°C |
| Storage Temperature | Storage Temperature Range | -40°C to 85°C |
| Humidity | Operating Humidity Range | 5% to 95% RH |
| Supply Voltage | Supply Voltage Range | 12 to 24 V DC |
| Power Consumption | Maximum Power Consumption | 1 W |
| Dimensions | Module Dimensions (L x W x H) | 100 x 60 x 20 mm |
| Weight | Module Weight | 100 g |
| Certifications | Compliance Certifications | CE, UL |
Instructions
Installation:
- Ensure the module is installed in a well-ventilated area within the specified operating temperature range.
- Connect the power supply to the terminal block, ensuring the voltage is within the specified range (12 to 24 V DC).
Wiring:
- Connect each input/output channel to the corresponding terminals on the module.
- For inputs, connect the signal source to the input terminals.
- For outputs, connect the load to the output terminals.
Configuration:
- Use a Modbus RTU compatible software or hardware to configure the module.
- Set the device address, baud rate, data bits, parity, and stop bits according to your system requirements.
Operation:
- Monitor and control the I/O channels using the configured communication protocol.
- Ensure that the current through each channel does not exceed 20 mA and the total current does not exceed 320 mA.
Maintenance:
- Regularly inspect the connections for any signs of wear or damage.
- Clean the module with a dry cloth to remove dust and debris.
Troubleshooting:
- If the module does not respond, check the power supply and communication settings.
- Verify that all connections are secure and within the specified limits.
- Refer to the user manual for detailed troubleshooting steps and error codes.
Inquiry - MCC56-16IO1B
