Share:
Specifications
SKU: 10062054
Catalog Scans - Shortform Datasheet
| Parameter | Symbol | Min | Typ | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Input Voltage | VIN | 4.5 | - | 20 | V | Operating range |
| Output Voltage | VOUT | 1.8 | - | 5.0 | V | Adjustable |
| Output Current | IOUT | - | 1.5 | 3.0 | A | Continuous |
| Quiescent Current | IQ | - | 2.5 | 5.0 | μA | Shutdown mode |
| Efficiency | η | - | 92 | 97 | % | At full load |
| Dropout Voltage | VDROP | - | 120 | 200 | mV | At full load |
| Load Regulation | - | - | 0.5 | 1.0 | % | From 0 to full load |
| Line Regulation | - | - | 0.1 | 0.5 | %/V | Over input voltage range |
| Ripple Rejection | - | 50 | 70 | 80 | dB | At 100 kHz |
| Operating Temperature | TOP | -40 | - | 125 | °C | Junction temperature |
| Storage Temperature | TSTG | -55 | - | 150 | °C | Storage conditions |
| Package Type | - | - | - | - | TO-252 (DPAK) | - |
Instructions for Use:
Input Voltage (VIN):
- Ensure the input voltage is within the specified range (4.5V to 20V) to avoid damage to the device.
Output Voltage (VOUT):
- The output voltage can be adjusted between 1.8V and 5.0V using external resistors. Refer to the datasheet for the specific resistor values required.
Output Current (IOUT):
- The device can provide a continuous output current of up to 3.0A. Ensure the load does not exceed this limit to prevent overheating and potential failure.
Quiescent Current (IQ):
- In shutdown mode, the quiescent current is very low, typically between 2.5μA and 5.0μA. This helps in reducing power consumption when the device is not in use.
Efficiency (η):
- The efficiency of the device is high, typically ranging from 92% to 97% at full load. This makes it suitable for applications where power efficiency is critical.
Dropout Voltage (VDROP):
- The dropout voltage is the minimum difference between the input and output voltages required to maintain regulation. It is typically between 120mV and 200mV at full load.
Load Regulation:
- The load regulation is the change in output voltage due to changes in load current. It is typically between 0.5% and 1.0%.
Line Regulation:
- The line regulation is the change in output voltage due to changes in input voltage. It is typically between 0.1% and 0.5% per volt of input voltage change.
Ripple Rejection:
- The ripple rejection is the ability of the device to suppress input voltage ripple. It is typically between 50dB and 80dB at 100kHz.
Operating Temperature (TOP):
- The device is designed to operate over a wide temperature range from -40°C to 125°C. Ensure that the ambient temperature and thermal design allow the junction temperature to stay within this range.
Storage Temperature (TSTG):
- The device can be stored in environments with temperatures ranging from -55°C to 150°C without damage.
Package Type:
- The MG15J6ES1 is available in a TO-252 (DPAK) package, which is suitable for surface mount applications. Ensure proper soldering techniques are used to avoid thermal stress and mechanical damage.
For detailed application circuits and further information, refer to the datasheet provided by the manufacturer.
(For reference only)Inquiry - MG15J6ES1
