Share:
Specifications
SKU: 10076883
Integrates inverter: Power Circuit and Control Circuits
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full Part Number | MIG150J6CSB1W |
| Type | Device Type | IGBT Module |
| Package | Package Type | 62mm x 62mm |
| Voltage Rating (VDC) | Maximum DC Voltage Rating | 1500 V |
| Current Rating (IC) | Continuous Current at Tc = 25°C | 600 A |
| Peak Current (Icm) | Peak Current for 10 ms, Tc = 25°C | 1200 A |
| Collector-Emitter Saturation Voltage (Vce(sat)) | Collector-Emitter Saturation Voltage at IC = 600 A, Tc = 25°C | 1.8 V |
| Turn-Off Time (t(off)) | Turn-Off Time | 3.5 μs |
| Turn-On Time (t(on)) | Turn-On Time | 1.2 μs |
| Thermal Resistance (Rth(j-c)) | Thermal Resistance from Junction to Case | 0.15 K/W |
| Operating Temperature Range (Tj) | Operating Junction Temperature Range | -40°C to 150°C |
| Storage Temperature Range (Tstg) | Storage Temperature Range | -55°C to 150°C |
| Case Temperature (Tc) | Maximum Case Temperature | 125°C |
| Isolation Voltage (VISO) | Isolation Voltage | 2500 Vrms |
| Mounting Torque | Mounting Torque for Screws | 12 Nm |
Instructions:
Handling and Storage:
- Store the module in a dry, clean environment to prevent corrosion.
- Avoid exposure to high temperatures or humidity.
Installation:
- Ensure the mounting surface is flat and clean to achieve good thermal contact.
- Use the recommended mounting torque (12 Nm) to secure the module.
- Apply a suitable thermal interface material (TIM) between the module and the heat sink for optimal heat dissipation.
Electrical Connections:
- Connect the module according to the specified pinout.
- Use appropriate wire gauges to handle the rated current.
- Ensure all connections are tight and secure to prevent arcing or overheating.
Operation:
- Operate the module within the specified voltage and current ratings.
- Monitor the junction temperature (Tj) to ensure it does not exceed 150°C.
- Implement proper cooling solutions to maintain the case temperature below 125°C.
Testing:
- Perform initial testing under controlled conditions to verify correct installation and operation.
- Regularly inspect the module for signs of wear or damage.
Safety:
- Follow all safety guidelines when handling high-voltage components.
- Use appropriate personal protective equipment (PPE) during installation and maintenance.
Inquiry - MIG150J6CSB1W
