Share:
Specifications
SKU: 10083493
| Parameter | Value |
|---|---|
| Part Number | CM400DY-24NF |
| Type | IGBT Module |
| Technology | Trench Gate Field Stop (FGFS) |
| Package | D2PAK (TO-263) |
| Collector-Emitter Voltage (Vce) | 1200 V |
| Collector Current (Ic) | 400 A (at 25°C) |
| Collector Current (Ic) at 85°C | 350 A |
| Emitter Current (Ie) | 400 A |
| Gate-Emitter Voltage (Vge) | ±20 V |
| Power Dissipation (Ptot) | 1500 W |
| Thermal Resistance (Rth(j-c)) | 0.025 K/W |
| Operating Temperature Range (Tj) | -40°C to +150°C |
| Storage Temperature Range (Tstg) | -55°C to +150°C |
| Case Temperature (Tc) | -40°C to +125°C |
| Isolation Voltage (Viso) | 2500 Vrms |
| Reverse Recovery Time (trr) | 250 ns |
| Switching Losses (Eon) | 1.5 mJ (at 800 V, 200 A) |
| Switching Losses (Eoff) | 1.8 mJ (at 800 V, 200 A) |
| Turn-on Time (ton) | 100 ns |
| Turn-off Time (toff) | 120 ns |
| Gate Charge (Qg) | 200 nC |
Instructions for Use
Handling Precautions:
- ESD Protection: Always use proper ESD protection when handling the module.
- Mounting: Ensure that the mounting surface is clean and flat to avoid thermal resistance issues.
- Torque: Apply the recommended torque to the mounting screws to ensure good thermal contact.
Installation:
- Heatsink: Use a suitable heatsink with thermal paste to ensure efficient heat dissipation.
- Cooling: Ensure adequate cooling to keep the junction temperature within the specified range.
- Connections: Use high-quality wires and connectors to minimize resistance and inductance.
Operational Considerations:
- Gate Drive: Use a gate driver with appropriate drive strength and voltage levels to ensure reliable operation.
- Overcurrent Protection: Implement overcurrent protection to prevent damage from excessive currents.
- Thermal Monitoring: Monitor the temperature of the module to prevent overheating.
Testing:
- Initial Testing: Perform initial testing at low power to verify correct installation and operation.
- Full Load Testing: Gradually increase the load to full capacity while monitoring performance and temperature.
Storage:
- Environment: Store the module in a dry, cool environment to prevent moisture damage.
- Packaging: Keep the module in its original packaging until ready for use.
For more detailed information, refer to the datasheet provided by the manufacturer.
(For reference only)Inquiry - CM400DY-24NF
