Share:
Specifications
SKU: 10088538
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Collector-Emitter Voltage | VCE | - | - | 1200 | V | Maximum voltage between collector and emitter with the gate open |
| Gate-Emitter Voltage | VGE | -15 | - | 15 | V | Maximum allowable gate-emitter voltage |
| Continuous Collector Current | IC | - | 600 | - | A | Continuous current through the collector |
| Pulse Collector Current | IC(rms) | - | 900 | - | A | Peak pulse current through the collector (10 ms, 1% duty cycle) |
| Power Dissipation | PTOT | - | - | 1800 | W | Maximum total power dissipation |
| Junction Temperature | TJ | -55 | - | 175 | °C | Operating junction temperature range |
| Storage Temperature | TSTG | -55 | - | 150 | °C | Storage temperature range |
| Thermal Resistance | Rth(j-c) | - | 0.2 | - | K/W | Thermal resistance from junction to case |
| Turn-On Time | ton | - | 0.3 | 1.5 | μs | Time required for the device to turn on |
| Turn-Off Time | toff | - | 0.3 | 1.5 | μs | Time required for the device to turn off |
| Gate Charge | QG | - | 120 | - | nC | Total gate charge |
| Input Capacitance | Cies | - | 2400 | - | pF | Input capacitance at VGE = 0 V, VCE = 600 V |
| Output Capacitance | Coes | - | 140 | - | pF | Output capacitance at VGE = 0 V, VCE = 600 V |
| Reverse Transfer Capacitance | Crss | - | 180 | - | pF | Reverse transfer capacitance at VGE = 0 V, VCE = 600 V |
Instructions for Use:
Mounting and Handling:
- Ensure proper heat sinking to manage thermal resistance and maintain junction temperature within safe limits.
- Handle the device with care to avoid mechanical damage and electrostatic discharge (ESD).
Electrical Connections:
- Connect the gate and emitter terminals carefully to avoid short circuits.
- Use appropriate gate drive circuits to ensure reliable turn-on and turn-off times.
Thermal Management:
- Monitor the junction temperature and ensure it does not exceed 175°C.
- Use thermal paste or thermal interface materials to improve heat transfer between the device and the heatsink.
Operating Conditions:
- Do not exceed the maximum ratings for collector-emitter voltage, gate-emitter voltage, and continuous or pulse collector current.
- Ensure that the device operates within the specified temperature ranges.
Storage:
- Store the device in a dry, cool environment to prevent moisture damage.
- Avoid exposure to extreme temperatures and humidity.
Testing:
- Use a suitable test setup to verify the device parameters before installation.
- Perform functional tests to ensure the device meets the application requirements.
Safety:
- Follow all safety guidelines and regulations when handling high-voltage and high-current components.
- Use protective equipment and follow proper grounding procedures.
Inquiry - SKIIP12NAB126V1
