Share:
Specifications
SKU: 10088880
| Parameter | Description | Value |
|---|---|---|
| Part Number | Product Identifier | PM100CSA120 |
| Type | Component Type | MOSFET |
| Technology | Technology Used | SiC (Silicon Carbide) |
| VDS | Drain-Source Voltage | 1200 V |
| ID | Continuous Drain Current | 100 A |
| RDS(on) | On-State Resistance at 25°C | 4.5 mΩ |
| RDS(on) | On-State Resistance at 175°C | 6.3 mΩ |
| QG | Gate Charge | 280 nC |
| QOSS | Output Capacitance Charge | 110 nC |
| Eoss | Energy Stored in Output Capacitance | 3.3 μJ |
| fSW | Switching Frequency | Up to 100 kHz |
| TJ | Junction Temperature Range | -55°C to +175°C |
| Package | Package Type | TO-247-3L |
| Pin Configuration | Pin Assignment | D (Drain), G (Gate), S (Source) |
| Storage Temperature | Storage Temperature Range | -65°C to +150°C |
Instructions for Use:
Handling Precautions:
- Handle the device with care to avoid damage.
- Use proper ESD (Electrostatic Discharge) protection when handling the device.
Mounting:
- Ensure the mounting surface is clean and flat.
- Apply thermal paste or a thermal pad between the device and the heatsink for optimal heat dissipation.
- Torque the mounting screws to the recommended specifications to avoid over-tightening or under-tightening.
Biasing:
- Apply the gate voltage within the specified range to ensure reliable operation.
- Use a gate resistor to limit the current during switching transitions.
Thermal Management:
- Ensure adequate cooling to keep the junction temperature within the specified range.
- Consider forced air cooling or liquid cooling for high-power applications.
Circuit Design:
- Use short, low-inductance connections to minimize parasitic effects.
- Place decoupling capacitors close to the power supply pins to reduce noise.
Testing:
- Perform initial testing at low power levels to verify correct operation.
- Gradually increase the power level while monitoring temperature and performance.
Storage:
- Store the device in a dry, cool place away from direct sunlight.
- Keep the device in its original packaging until ready for use to protect against static damage.
Inquiry - PM100CSA120
