Share:
Specifications
SKU: 10093044
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full part number | 6DI100A-060 |
| Type | Component type | Diode |
| Technology | Diode technology | Silicon |
| Maximum Reverse Voltage (V_RRMS) | Maximum reverse voltage | 600 V |
| Maximum Average Rectified Current (I_F(AV)) | Continuous forward current at T_A = 25°C | 100 A |
| Peak Repetitive Reverse Voltage (V_RRM) | Peak repetitive reverse voltage | 600 V |
| Peak Forward Surge Current (I_FSM) | Non-repetitive peak forward surge current (8.3 ms single half sine-wave) | 800 A |
| Forward Voltage Drop (V_F) | Forward voltage drop at I_F = 100 A, T_J = 25°C | 1.1 V |
| Reverse Recovery Time (t_rr) | Reverse recovery time at I_F = 100 A, I_RM = 10 A, T_J = 25°C | 150 ns |
| Thermal Resistance (R_th(j-c)) | Junction to case thermal resistance | 0.15 K/W |
| Operating Temperature Range (T_J) | Junction temperature range | -55°C to +175°C |
| Storage Temperature Range (T_STG) | Storage temperature range | -55°C to +175°C |
| Package | Package type | TO-247-2L |
Instructions for Use:
Mounting:
- Ensure that the diode is mounted on a heatsink with adequate thermal management to maintain the junction temperature within the specified range.
- Use a thermal compound to enhance heat transfer between the diode and the heatsink.
Electrical Connections:
- Connect the anode and cathode terminals correctly to avoid reverse breakdown.
- Ensure that the connections are secure and free from mechanical stress.
Surge Handling:
- The diode can handle non-repetitive surge currents up to 800 A. Ensure that any surge conditions are within this limit to prevent damage.
Thermal Management:
- Monitor the junction temperature to ensure it does not exceed 175°C. Use appropriate cooling methods such as forced air or liquid cooling if necessary.
Storage:
- Store the diode in a dry, cool place within the specified storage temperature range (-55°C to +175°C).
Handling:
- Handle the diode with care to avoid mechanical damage. Use anti-static precautions to prevent electrostatic discharge (ESD) damage.
Testing:
- Before installing the diode in a circuit, perform a visual inspection and verify the electrical parameters using a multimeter or other testing equipment.
Compliance:
- Ensure that the diode meets all relevant safety and regulatory standards for your application.
Inquiry - 6DI100A-060
