Share:
Specifications
SKU: 11190283
| Parameter | Symbol | Conditions | Min | Typical | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | Operating | 4.75 | - | 5.25 | V |
| Output Current (Sink) | IOL | VOL = 0.4V, TA = 25°C | -20 | - | - | mA |
| Output Current (Source) | IOH | VOH = 2.4V, TA = 25°C | - | - | 20 | mA |
| Input Voltage | VIH | Input High | 2.0 | - | - | V |
| Input Voltage | VIL | Input Low | - | - | 0.8 | V |
| Input Current | IIN | VIN = 0V to VCC | -1 | - | 1 | μA |
| Propagation Delay Time | tpd | VCC = 5V, TA = 25°C | - | 20 | - | ns |
| Power Dissipation | PD | Maximum at TA = 25°C | - | - | 360 | mW |
| Operating Temperature Range | TA | - | -40 | - | 85 | °C |
| Storage Temperature Range | TSTG | - | -65 | - | 150 | °C |
Instructions for Use:
- Supply Voltage: Ensure the supply voltage is within the specified range (4.75V to 5.25V) to avoid damage to the device.
- Output Current: The device can sink up to 20mA and source up to 20mA. Do not exceed these limits to prevent overheating or damage.
- Input Voltage Levels: For reliable operation, ensure input voltages are within the specified ranges (VIH > 2.0V and VIL < 0.8V).
- Propagation Delay: The typical propagation delay is 20ns under standard conditions. This value can vary with temperature and supply voltage.
- Power Dissipation: The maximum power dissipation is 360mW. Ensure adequate heat dissipation if operating near this limit.
- Temperature Ranges: The operating temperature range is -40°C to 85°C, and the storage temperature range is -65°C to 150°C. Store and operate the device within these limits to ensure reliability.
- Handling: Handle the device with care to avoid static discharge, which can damage the internal circuits. Use proper ESD protection practices.
Inquiry - SN75C188DR
