Share:
Specifications
SKU: 11190697
IC BUFFER NON-INVERT 6V 14DIP
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 2.0 | - | 6.0 | V | |
| Input Low Voltage | VIL | - | 0.8 | - | V | |
| Input High Voltage | VIH | - | 2.0 | - | V | |
| Output Low Voltage (IOL = 4 mA) | VOL | - | 0.1 | 0.2 | V | |
| Output High Voltage (IOH = -4 mA) | VOH | 2.4 | - | 5.0 | V | |
| Input Current (VIN = 0 V) | IINL | -1 | - | 1 | μA | |
| Input Current (VIN = VCC) | IINH | -1 | - | 1 | μA | |
| Output Current (VOUT = 0.4 V) | IOL | - | - | -32 | mA | |
| Output Current (VOUT = VCC - 0.4 V) | IOH | - | - | -4 | mA | |
| Propagation Delay Time (tPLH, tPHL) | tp | - | 9 | 18 | ns | @ VCC = 5 V, TA = 25°C |
| Power Dissipation | PD | - | - | 500 | mW | Per Package |
| Operating Temperature Range | TA | -40 | - | 85 | °C | |
| Storage Temperature Range | TSTG | -65 | - | 150 | °C |
Instructions for Use
Power Supply:
- Ensure the supply voltage (VCC) is within the range of 2.0 V to 6.0 V.
- Connect VCC to the positive power supply and GND to ground.
Input Signals:
- Apply input signals that are within the specified input voltage levels:
- Low input (VIL): 0.8 V or less.
- High input (VIH): 2.0 V or more.
- Ensure input currents are within the limits of ±1 μA.
- Apply input signals that are within the specified input voltage levels:
Output Signals:
- The output low voltage (VOL) should be 0.1 V to 0.2 V when sourcing 4 mA.
- The output high voltage (VOH) should be 2.4 V to 5.0 V when sinking -4 mA.
- Ensure output currents do not exceed -32 mA (sink) and -4 mA (source).
Propagation Delay:
- The propagation delay time (tp) is typically 9 ns with a maximum of 18 ns at VCC = 5 V and ambient temperature (TA) = 25°C.
Temperature Considerations:
- Operate the device within the temperature range of -40°C to 85°C.
- Store the device within the temperature range of -65°C to 150°C.
Power Dissipation:
- Ensure the total power dissipation does not exceed 500 mW per package.
Handling:
- Handle the device with care to avoid damage from electrostatic discharge (ESD).
- Follow standard ESD protection guidelines during handling and assembly.
Package Information:
- The SN74HC125N is available in various package types. Refer to the datasheet for specific package dimensions and pin configurations.
For detailed information and additional specifications, refer to the official Texas Instruments datasheet for the SN74HC125N.
(For reference only)Inquiry - SN74HC125N
