Share:
Specifications
SKU: 11192735
| Parameter | Symbol | Min | Typical | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Drain-Source Voltage | VDS | - | 1000 | - | V | - |
| Gate-Source Voltage | VGS | -20 | - | 20 | V | - |
| Continuous Drain Current (Tc = 25°C) | ID | - | 60 | - | A | - |
| Continuous Drain Current (Tc = 85°C) | ID | - | 36 | - | A | - |
| Pulse Drain Current (tp = 10 μs, IGS = 10 A) | ID(p) | - | 180 | - | A | - |
| Total Power Dissipation (Tc = 25°C) | PTOT | - | 480 | - | W | - |
| Total Power Dissipation (Tc = 85°C) | PTOT | - | 288 | - | W | - |
| Junction Temperature | TJ | - | - | 175 | °C | - |
| Storage Temperature Range | TSTG | -55 | - | 150 | °C | - |
| Thermal Resistance, Junction to Case | Rth(j-c) | - | 0.5 | - | K/W | - |
| Thermal Resistance, Junction to Ambient (Typical) | Rth(j-a) | - | 3.5 | - | K/W | - |
Instructions for Use:
Handling Precautions:
- The FGL60N100BNTD is sensitive to electrostatic discharge (ESD). Use appropriate ESD protection measures during handling and assembly.
- Avoid mechanical stress on the leads and body of the device.
Mounting:
- Ensure proper heat sinking to manage thermal resistance and maintain the junction temperature within safe limits.
- Follow recommended PCB layout guidelines to minimize parasitic inductances and ensure reliable operation.
Operating Conditions:
- Do not exceed the maximum ratings listed in the table under any operating conditions.
- For continuous operation, ensure that the drain current and power dissipation do not exceed the values specified for the given case temperature.
Gate Drive:
- Apply a gate-source voltage (VGS) within the specified range to turn the MOSFET on or off.
- Use a gate resistor to control the switching speed and reduce electromagnetic interference (EMI).
Storage:
- Store the device in a dry, cool environment away from direct sunlight and sources of heat.
- Keep the device in its original packaging until ready for use to protect against moisture and static damage.
Testing:
- Use a suitable test setup to verify the device parameters and performance before integrating it into your application.
- Refer to the datasheet for detailed testing procedures and recommended test circuits.
Safety:
- Ensure that all safety standards and regulations are followed during the design, assembly, and operation of circuits using this device.
- Use appropriate protective equipment when working with high voltages and currents.
Inquiry - FGL60N100BNTD
