Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 2.0V to 5.5V.
   • Connect VCC to the power supply and GND to the ground.

2. Input Signals:

   • Apply logic high or low signals to the input pins (A1-A16).
   • Ensure input currents do not exceed the specified limits of 1 μA for high-level inputs and -1 μA for low-level inputs.

3. Output Signals:

   • The device provides non-inverting buffered outputs (Y1-Y16).
   • The output drive currents are -8 mA for high-level outputs (IOH) and 16 mA for low-level outputs (IOL).

4. 3-State Control:

   • Use the OE (Output Enable) pin to control the state of the outputs.
   • When OE is high, the outputs are in a high-impedance state.
   • When OE is low, the outputs are active and follow the input signals.

5. Propagation Delay:

   • The typical propagation delay time (tpd) is 5 ns, which should be considered when designing timing-sensitive circuits.

6. Temperature Considerations:

   • Operate the device within the ambient temperature range of -40°C to 85°C.
   • Store the device in an environment with temperatures ranging from -65°C to 150°C.

7. Package Handling:

   • Handle the TSSOP-24 package with care to avoid damage to the pins.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

8. Soldering:

   • Use appropriate soldering techniques to ensure reliable connections.
   • Avoid excessive heat during soldering to prevent damage to the device.

9. Testing:

   • After assembly, verify the functionality of the device by applying known input signals and measuring the corresponding output signals.
   • Check for proper operation under different supply voltages and temperature conditions.

By following these instructions, you can ensure optimal performance and reliability of the PI74FCT162245TV device in your application.