Share:
Specifications
SKU: 11194910
You deserve it
| Parameter | Description | Value |
|---|---|---|
| Device Type | CPLD (Complex Programmable Logic Device) | - |
| Family | MAX 7000S | - |
| Part Number | EPM7128STI100-10 | - |
| Package | TQFP (Thin Quad Flat Package) | 100-pin |
| Speed Grade | -10 | - |
| I/O Pins | Number of I/O Pins | 84 |
| Logic Cells | Number of Logic Cells | 1,280 |
| Macrocells | Number of Macrocells | 128 |
| Embedded Array Blocks (EABs) | Number of EABs | 4 |
| EAB Size | Size of each EAB | 512 bits |
| Maximum Operating Frequency (fMAX) | Typical fMAX for typical applications | 150 MHz |
| Power Supply Voltage (VCC) | Operating voltage range | 3.3V ± 5% |
| Standby Current (ISB) | Current consumption in standby mode | 10 μA (typical) |
| Active Current (ICC) | Current consumption in active mode | 50 mA (typical) |
| Operating Temperature Range | Industrial temperature range | -40°C to +85°C |
| Configuration Memory | Non-volatile configuration memory | 128 Kbits |
| Configuration Modes | Available configuration modes | Active Serial, Passive Serial, Parallel Peripheral, JTAG |
| Configuration Time | Typical configuration time | 10 ms (typical) |
| Input/Output Standards | Supported I/O standards | LVTTL, LVCMOS, SSTL-2, SSTL-3 |
| ESD Protection | Electrostatic discharge protection | HBM: 2000V, MM: 200V |
Instructions for Use:
Power Supply:
- Ensure the power supply voltage (VCC) is within the specified range of 3.3V ± 5%.
- Connect a stable power source to avoid voltage fluctuations.
Configuration:
- Use one of the supported configuration modes (Active Serial, Passive Serial, Parallel Peripheral, JTAG) to program the device.
- Refer to the device datasheet for specific configuration commands and sequences.
Input/Output Handling:
- Set the I/O standards (LVTTL, LVCMOS, SSTL-2, SSTL-3) according to the requirements of your application.
- Ensure proper termination and signal integrity for high-speed signals.
Temperature Considerations:
- Operate the device within the industrial temperature range of -40°C to +85°C to ensure reliable performance.
- Provide adequate cooling if operating in high-temperature environments.
ESD Protection:
- Handle the device with care to avoid electrostatic discharge.
- Use appropriate ESD protection equipment and follow recommended handling procedures.
Standby Mode:
- To reduce power consumption, place the device in standby mode when not in use.
- The typical standby current is 10 μA.
Active Mode:
- Monitor the active current consumption, which is typically 50 mA, to ensure it does not exceed the power supply capabilities.
Frequencies:
- Ensure that the maximum operating frequency (fMAX) of 150 MHz is not exceeded to maintain reliable operation.
Storage and Handling:
- Store the device in a dry, cool environment to prevent moisture damage.
- Follow recommended storage and handling guidelines to ensure long-term reliability.
Inquiry - EPM7128STI100-10
