Share:
Specifications
SKU: 11196532
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.5 | - | 5.5 | V | Operating voltage range |
| Input Voltage | VI | -0.3 | - | 5.5 | V | Maximum input voltage |
| Output Voltage | VO | 0 | - | 5.0 | V | Output voltage range |
| Quiescent Current | IQ | - | 1 | 2 | mA | Typical quiescent current |
| Output Current | IO | - | 100 | 150 | mA | Maximum continuous output current |
| Operating Temp. | TA | -40 | - | 85 | °C | Ambient operating temperature range |
| Storage Temp. | TS | -65 | - | 150 | °C | Storage temperature range |
| Junction Temp. | TJ | -40 | - | 125 | °C | Maximum junction temperature |
Instructions for Use
Power Supply:
- Ensure the supply voltage (VCC) is within the specified range of 4.5V to 5.5V.
- Connect the supply voltage to the VCC pin and ground to the GND pin.
Input Signal:
- The input voltage (VI) should not exceed 5.5V or go below -0.3V to avoid damage.
- Connect the input signal to the appropriate input pin as specified in the datasheet.
Output Signal:
- The output voltage (VO) can range from 0V to 5.0V.
- Ensure the load connected to the output does not draw more than the maximum continuous output current (IO).
Thermal Management:
- The device can operate at ambient temperatures ranging from -40°C to 85°C.
- For extended reliability, ensure proper heat dissipation if the device is expected to operate near its maximum junction temperature (TJ).
Storage:
- Store the device in a dry environment with temperatures between -65°C and 150°C to prevent damage.
Handling:
- Handle the device with care to avoid static discharge, which can damage sensitive components.
- Follow standard ESD (Electrostatic Discharge) precautions when handling the device.
Mounting:
- Ensure proper mounting and soldering techniques to avoid mechanical stress on the device.
- Follow the recommended PCB layout guidelines provided in the datasheet for optimal performance.
Testing:
- Before finalizing the design, test the device under various conditions to ensure it meets the required specifications.
- Use appropriate test equipment and methods to validate the performance.
Inquiry - BCW66G
