Share:
Specifications
SKU: 11196534
| Parameter | Description | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Power Supply (VDD) | Operating voltage for the device | 2.7 | - | 3.6 | V |
| Analog Input Voltage Range | Range of input voltages for analog video inputs | 0.3 | - | 1.0 | Vpp |
| Digital Output Data Rate | Maximum data rate for digital output | - | - | 165 | Mbps |
| Pixel Clock Frequency | Range of supported pixel clock frequencies | 10 | - | 165 | MHz |
| I2C Interface Speed | Maximum speed of the I2C interface | - | - | 400 | kbps |
| Operating Temperature Range | Temperature range over which the device is specified to operate | -40 | - | 85 | °C |
| Storage Temperature Range | Temperature range over which the device can be stored without damage | -55 | - | 150 | °C |
| Humidity Range | Relative humidity range for operation | 0 | - | 95 | % |
| ESD Rating | Electrostatic discharge tolerance | - | - | 2000 | V |
| CMOS Input Voltage Level | Voltage level for CMOS inputs | 0 | - | 3.6 | V |
| CMOS Output Voltage Level | Voltage level for CMOS outputs | 0 | - | 3.6 | V |
Instructions for Using ADV7181CBSTZ
Power Supply:
- Ensure the power supply voltage (VDD) is within the range of 2.7V to 3.6V.
- Use a stable and clean power source to avoid noise and instability.
Analog Input Configuration:
- Connect the analog video inputs to the appropriate pins on the ADV7181CBSTZ.
- The input voltage should be within the range of 0.3Vpp to 1.0Vpp.
Digital Output Configuration:
- Configure the digital output to match the required data rate and format.
- The maximum data rate supported is 165 Mbps.
Pixel Clock Configuration:
- Set the pixel clock frequency to a value between 10 MHz and 165 MHz.
- Ensure the pixel clock is stable and synchronized with the video input.
I2C Interface:
- Use the I2C interface to configure the ADV7181CBSTZ.
- The I2C interface supports speeds up to 400 kbps.
Temperature Considerations:
- Operate the device within the temperature range of -40°C to 85°C.
- Store the device in a temperature range of -55°C to 150°C.
Humidity Considerations:
- Maintain relative humidity levels between 0% and 95% during operation.
ESD Protection:
- Handle the device with care to avoid electrostatic discharge.
- The device has an ESD rating of up to 2000V.
CMOS Inputs and Outputs:
- Ensure CMOS input voltages are within the range of 0V to 3.6V.
- CMOS output voltages will also be within this range.
General Handling:
- Follow standard handling procedures to prevent damage to the device.
- Refer to the datasheet for detailed pin configurations and additional specifications.
Inquiry - ADV7181CBSTZ
